bond strength的例句大全

Adhesion is the bond strength measurement of a coating to a substrate.

粘附力是指涂料粘结到基底材料上的粘接强度衡量标准.

After testing, thermal aging volatility viscosity, slows the permeability of the book, affecting the bond strength.

经老化试验测试, 热稳定性差的胶粘度增高, 会降低书的渗透性, 影响粘结强度.

A popular concept of the view that the more the relatalion glue bond strength.

一种流行的观念认为,浆糊用量越多,粘合强度越强.

Objective To study and shear bond strength of resin-reinforced glass ionomer cement ( RGIC ) on orthodontic brackets.

目的探讨两种树脂加强型玻璃离子水门汀对托槽粘结强度的影响.

Film forming , suspension performance and bond strength of the coating were investigated experimentally.

结果表明, 该方法是开发研究新涂料配方的有效方法.

The bond strength of Ni-P coating on Mg alloy AZ 91 D is studied with metalloscope, SEM, EDS.

利用金相显微镜 、 SEM 、 能谱仪(EDS),研究了镁合金AZ91D的化学镀Ni-P的结合强度.

The results indicate that the method accurately measure the bond strength of laser cladding.

结果表明,这种方法较为准确地测量了熔覆层与基体之间的结合强度.

The transparency of the composite body and bond strength.

影响复合体的透明度和粘接强度.

Influence of Storage Methods on Microtensile Bond Strength of Dentin Adhesive System.

离体牙储存方式对牙本质粘结系统微拉伸强度的影响.

The bond strength adhesive tape for repeatability of test results is critical.

胶带的粘合强度对于测试结果的可重复性非常关键.

Melt adhesives have good early viscous, achieve maximum bond strength.

熔融型胶粘剂具有良好的初粘性, 并能迅速达到最高粘结强度.

The bond strength is its cohesiveness of adhesives and adhesive and glued bodies adhesive force.

粘结强度是由胶粘剂本身的内聚力和胶粘剂与被粘物体之间的粘附力所决定.

Indirect Methods: To measure the interface bond strength include the interlaminar shear strength test.

测量界面粘结强度的间接方法包括层间剪切强度试验.

The strength of the assemblage is bond-strength limited.

纤维集合体的强力受粘合强力的限制.

Study on Influence of Wet Blasting Technology to Arc Spraying Deposit Bond Strength

液体喷砂工艺对电喷涂层结合强度的影响

By means of the orthogonal test and the variance analysis, the influence of dry blasting steel grit parameters on blasting result and bond strength of arc spraying was conducted.

应用正交试验法对干喷钢砂工艺参数对喷砂效果和结合强度的影响进行了试验研究，确定了优化的干喷钢砂电喷涂工艺规范。

The influence of different interface cementing agents on the bond strength of interface between the new and old concretes is studied in order to find out the most favorable interface cementing agent.

目的通过实验研究不同种类的水泥基无机材料界面剂对新旧混凝土劈拉强度的影响，从而得到对新旧混凝土粘结最有利的界面剂种类。

Influence of the Interface Cementing Agent on the Bond Strength of Interface

界面剂对界面劈拉强度的影响

The shear strength of the perforated brick masonry is much higher than which of ordinary brick masonry is indicated in the shear experiment. The mainly reason of mortar's pin key action and the second reason of cementing bond difference between brick and mortar are found.

受剪试验表明多孔砖砌体抗剪强度高于普通砖砌体抗剪强度，主要原因是砂浆的销键作用，其次是砂浆与块体的粘结力的差异。

The bond strength accretes with the increase of compressive strength of cement soil, and the bond force also accretes with the increase of bond length and contact area between shape steel and cement soil.

握裹强度随着水泥土抗压强度的提高而提高，握裹力随型钢与水泥土间握裹面积及锚固长度的增加而增大。